Independent and unbiased 2026 pricing data
HouseProjectCalc

Tampa, FL

Well Drilling Cost in Tampa

Estimated well drilling cost in Tampa

$4,750–$14,300

Roughly about 5% below the national average.

A competitive market and Florida codes balance to slightly below average.

Estimate your cost

Based on Tampa, FL pricing.

Estimated cost range

$4,750–$14,300

BudgetTypicalPremium

An estimate for planning, not a quote. Get written quotes from local pros below.

Estimate, not a quote. Local prices vary by contractor and project. These are 2026 estimates for Tampa, FL. Get written quotes from licensed Tampa contractors before you budget.

Quote too high? DIY your well drilling

Amazon picks · Sponsored

A contractor quote is mostly labor. If that estimate felt steep, here is the exact gear to tackle this job yourself. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

VEVOR Deep Well Submersible Pump, 1HP
VEVOR VEVOR Deep Well Submersible Pump, 1HP

$115.99

4" stainless submersible pump, 37 gpm, 207 ft head.

View on Amazon
VEVOR 30-Gallon Well Pressure Tank
VEVOR VEVOR 30-Gallon Well Pressure Tank

$219.99

Pre-charged vertical tank to smooth pressure and cut pump cycling.

View on Amazon
Varify 17-in-1 Well Water Test Kit
Varify Varify 17-in-1 Well Water Test Kit

$26.97

Strips plus bacteria tests for lead, iron, hardness, and more.

View on Amazon
Red Lion RLCB10-230 1HP Pump Control Box
Red Lion Red Lion RLCB10-230 1HP Pump Control Box

$84.99

230V control box for a 1HP submersible well pump.

View on Amazon

Free, no obligation

Get matched with local well drilling (tampa) pros

Tell us about your project and we will help you get free quotes from vetted contractors in your area.

By clicking the button below, I agree that HouseProjectCalc and up to four home-improvement providers matched to my project may contact me at the phone number and email I provided, including by automated telephone dialing system, prerecorded voice, text message, and email, about my project, even if my number is on a Do Not Call list. Consent is not a condition of any purchase. Message and data rates may apply. I have read and agree to the Privacy Policy and Terms of Use.

Secure form. We only share your details with pros you ask to be matched with. See our Privacy Policy.

What to know about well drilling in Tampa

High water tables and storms near Tampa stress foundations, so drainage and proper fill are key.

What affects well drilling cost in Tampa

Beyond the local market, the same factors that drive well drilling cost everywhere apply in Tampa:

  • Well depth and local geology.
  • Per-foot drilling rate and casing.
  • Pump, pressure tank, and wiring.
  • Plumbing to the house and permits.

Well Drilling cost by well depth in Tampa

These figures are adjusted for Tampa pricing (about 0.95x the national average), so they reflect what local homeowners actually pay.

Estimated well drilling cost by well depth in Tampa (2026)
Well depth Typical cost in Tampa Notes
Shallow (under 100 ft) $2,850 to $8,550 installed
Average (100 to 300 ft) $4,750 to $14,300 The baseline.
Deep (300 to 500 ft) $7,600 to $22,800 installed
Very deep (500 ft+) $10,500 to $31,400 installed

Well Drilling cost in Tampa vs other metros

How a well drilling in Tampa compares with nearby and similar-cost metros, using 2026 local estimates.

Metro Estimated well drilling cost vs national
Tampa, FL $4,750–$14,300 about 5% below the national average
Miami, FL $5,500–$16,500 about 10% above the national average
Orlando, FL $4,700–$14,100 about 6% below the national average
Jacksonville, FL $4,700–$14,100 about 6% below the national average
Fort Lauderdale, FL $5,400–$16,200 about 8% above the national average
Charlotte, NC $4,750–$14,300 about 5% below the national average

Frequently asked questions

How much does well drilling cost in Tampa?

In Tampa, FL, well drilling typically costs $4,750 to $14,300 in 2026 for a standard project, about 5% below the national average. Your exact price depends on size, materials, and scope.

Why does well drilling cost more or less in Tampa?

A competitive market and Florida codes balance to slightly below average. Labor rates, permit costs, and local demand are the main reasons Tampa prices differ from the national average.

Do I need a permit for well drilling in Tampa?

Most well drilling projects require a permit. Requirements vary by city and Florida jurisdiction, so confirm with your local building department. A licensed contractor usually pulls the permit for you.

When is the best time of year for well drilling in Tampa?

In Tampa, try to schedule major exterior work outside hurricane season (roughly June to November). Late fall through spring tends to be more reliable for roofing and siding.

Is well drilling cheaper outside Tampa?

Sometimes. Tampa runs about 5% below the national average. Nearby smaller towns with lower labor costs can come in cheaper, while denser urban areas often cost more. Always compare quotes from contractors who serve your specific area.

Well Drilling cost in other cities

See the national Well Drilling cost guide