Independent and unbiased 2026 pricing data
HouseProjectCalc

Tacoma, WA

Tile Installation Cost in Tacoma

Estimated tile installation cost in Tacoma

$825–$2,950

Roughly about 18% above the national average.

High Washington labor rates raise costs above average.

Estimate your cost

Based on Tacoma, WA pricing.

Estimated cost range

$825–$2,950

BudgetTypicalPremium

An estimate for planning, not a quote. Get written quotes from local pros below.

Estimate, not a quote. Local prices vary by contractor and project. These are 2026 estimates for Tacoma, WA. Get written quotes from licensed Tacoma contractors before you budget.

Quote too high? DIY your tile installation

Amazon picks · Sponsored

A contractor quote is mostly labor. If that estimate felt steep, here is the exact gear to tackle this job yourself. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

DEWALT 10-Inch Wet Tile Saw with Stand (D24000S)
DEWALT DEWALT 10-Inch Wet Tile Saw with Stand (D24000S)

$999.00

Pro-grade corded wet saw with stand and pump for clean porcelain and stone cuts.

View on Amazon
Custom Building Products SimpleSet Gray Thin-Set Mortar, 1 qt
Custom Building Products Custom Building Products SimpleSet Gray Thin-Set Mortar, 1 qt

$13.76

Premixed thin-set so you skip mixing for small floor and wall tile jobs.

View on Amazon
DGSL Tile Leveling System, 300 Spacers + 100 Wedges + Plier
DGSL DGSL Tile Leveling System, 300 Spacers + 100 Wedges + Plier

$24.19

Leveling clips and wedges keep tiles flat and lippage-free as mortar cures.

View on Amazon
QEP Molded Rubber Grout Float, 4 x 9.5 in
QEP QEP Molded Rubber Grout Float, 4 x 9.5 in

$10.97

Non-stick gum rubber face spreads grout cleanly without scuffing tile.

View on Amazon

Free, no obligation

Get matched with local tile installation (tacoma) pros

Tell us about your project and we will help you get free quotes from vetted contractors in your area.

By clicking the button below, I agree that HouseProjectCalc and up to four home-improvement providers matched to my project may contact me at the phone number and email I provided, including by automated telephone dialing system, prerecorded voice, text message, and email, about my project, even if my number is on a Do Not Call list. Consent is not a condition of any purchase. Message and data rates may apply. I have read and agree to the Privacy Policy and Terms of Use.

Secure form. We only share your details with pros you ask to be matched with. See our Privacy Policy.

What to know about tile installation in Tacoma

Interior project costs in Tacoma track the local labor market more than the weather, so the regional pricing above is the main driver here.

What affects tile installation cost in Tacoma

Beyond the local market, the same factors that drive tile installation cost everywhere apply in Tacoma:

  • Area in square feet.
  • Tile type: ceramic, porcelain, stone, or glass.
  • Location: floor, wall, or shower waterproofing.
  • Pattern complexity and tile size.

Tile Installation cost by tile type in Tacoma

These figures are adjusted for Tacoma pricing (about 1.18x the national average), so they reflect what local homeowners actually pay.

Estimated tile installation cost by tile type in Tacoma (2026)
Tile type Cost in Tacoma Typical total
Ceramic $6.61 to $23.60 /sq ft About $650 to $2,350
Porcelain $8.26 to $29.50 /sq ft About $825 to $2,950
Natural stone $12.39 to $44.25 /sq ft About $1,250 to $4,450
Glass or mosaic $13.22 to $47.20 /sq ft About $1,300 to $4,700

Tile Installation cost in Tacoma vs other metros

How a tile installation in Tacoma compares with nearby and similar-cost metros, using 2026 local estimates.

Metro Estimated tile installation cost vs national
Tacoma, WA $825–$2,950 about 18% above the national average
Seattle, WA $925–$3,300 about 32% above the national average
Spokane, WA $750–$2,650 about 6% above the national average
Sacramento, CA $825–$2,950 about 18% above the national average
Riverside, CA $825–$2,950 about 18% above the national average
Boulder, CO $825–$2,950 about 18% above the national average

Frequently asked questions

How much does tile installation cost in Tacoma?

In Tacoma, WA, tile installation typically costs $825 to $2,950 in 2026 for a standard project, about 18% above the national average. Your exact price depends on size, materials, and scope.

Why does tile installation cost more or less in Tacoma?

High Washington labor rates raise costs above average. Labor rates, permit costs, and local demand are the main reasons Tacoma prices differ from the national average.

Do I need a permit for tile installation in Tacoma?

Most tile installation projects require a permit. Requirements vary by city and Washington jurisdiction, so confirm with your local building department. A licensed contractor usually pulls the permit for you.

When is the best time of year for tile installation in Tacoma?

In Tacoma, the mild climate means most projects can run year-round, with only the occasional rainy stretch to plan around.

Is tile installation cheaper outside Tacoma?

Sometimes. Tacoma runs about 18% above the national average. Nearby smaller towns with lower labor costs can come in cheaper, while denser urban areas often cost more. Always compare quotes from contractors who serve your specific area.

Tile Installation cost in other cities

See the national Tile Installation cost guide