Independent and unbiased 2026 pricing data
HouseProjectCalc

Tacoma, WA

Cabinet Refacing Cost in Tacoma

Estimated cabinet refacing cost in Tacoma

$4,700–$10,600

Roughly about 18% above the national average.

High Washington labor rates raise costs above average.

Estimate your cost

Based on Tacoma, WA pricing.

Estimated cost range

$4,700–$10,600

BudgetTypicalPremium

An estimate for planning, not a quote. Get written quotes from local pros below.

Estimate, not a quote. Local prices vary by contractor and project. These are 2026 estimates for Tacoma, WA. Get written quotes from licensed Tacoma contractors before you budget.

Quote too high? DIY your cabinet refacing

Amazon picks · Sponsored

A contractor quote is mostly labor. If that estimate felt steep, here is the exact gear to tackle this job yourself. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Edge Supply Red Oak 24 x 96-inch Flat Cut
Edge Supply Edge Supply Red Oak 24 x 96-inch Flat Cut

$79.99

Peel-and-stick red oak veneer to reface cabinet boxes

View on Amazon
Sintuff 2 Sets 16.25'' W x 22.5'' H Unfinished Kitchen
Sintuff Sintuff 2 Sets 16.25'' W x 22.5'' H Unfinished Kitchen

$59.99

Unfinished replacement doors for a full reface

View on Amazon
Ravinte 30 Pack
Ravinte Ravinte 30 Pack

$26.99

30-pack of matte black pulls to finish the new look

View on Amazon
Rust-Oleum 392915 Cabinet Transformations Complete Coat
Rust-Oleum Home Rust-Oleum 392915 Cabinet Transformations Complete Coat

$64.96

Rust-Oleum Cabinet Transformations kit, no sanding needed

View on Amazon

Free, no obligation

Get matched with local cabinet refacing (tacoma) pros

Tell us about your project and we will help you get free quotes from vetted contractors in your area.

By clicking the button below, I agree that HouseProjectCalc and up to four home-improvement providers matched to my project may contact me at the phone number and email I provided, including by automated telephone dialing system, prerecorded voice, text message, and email, about my project, even if my number is on a Do Not Call list. Consent is not a condition of any purchase. Message and data rates may apply. I have read and agree to the Privacy Policy and Terms of Use.

Secure form. We only share your details with pros you ask to be matched with. See our Privacy Policy.

What to know about cabinet refacing in Tacoma

Interior project costs in Tacoma track the local labor market more than the weather, so the regional pricing above is the main driver here.

What affects cabinet refacing cost in Tacoma

Beyond the local market, the same factors that drive cabinet refacing cost everywhere apply in Tacoma:

  • Kitchen size and number of cabinets.
  • Refacing material: laminate, veneer, or solid wood.
  • New doors, drawer fronts, and hardware.
  • Condition of the existing cabinet boxes.

Cabinet Refacing cost by refacing material in Tacoma

These figures are adjusted for Tacoma pricing (about 1.18x the national average), so they reflect what local homeowners actually pay.

Estimated cabinet refacing cost by refacing material in Tacoma (2026)
Refacing material Typical cost in Tacoma Notes
Laminate / RTF $3,300 to $7,450 installed
Wood veneer $4,700 to $10,600 The baseline.
Solid wood $6,600 to $14,900 installed
New doors and drawer fronts $5,200 to $11,700 installed

Cabinet Refacing cost in Tacoma vs other metros

How a cabinet refacing in Tacoma compares with nearby and similar-cost metros, using 2026 local estimates.

Metro Estimated cabinet refacing cost vs national
Tacoma, WA $4,700–$10,600 about 18% above the national average
Seattle, WA $5,300–$11,900 about 32% above the national average
Spokane, WA $4,250–$9,550 about 6% above the national average
Sacramento, CA $4,700–$10,600 about 18% above the national average
Riverside, CA $4,700–$10,600 about 18% above the national average
Boulder, CO $4,700–$10,600 about 18% above the national average

Frequently asked questions

How much does cabinet refacing cost in Tacoma?

In Tacoma, WA, cabinet refacing typically costs $4,700 to $10,600 in 2026 for a standard project, about 18% above the national average. Your exact price depends on size, materials, and scope.

Why does cabinet refacing cost more or less in Tacoma?

High Washington labor rates raise costs above average. Labor rates, permit costs, and local demand are the main reasons Tacoma prices differ from the national average.

Do I need a permit for cabinet refacing in Tacoma?

Most cabinet refacing projects require a permit. Requirements vary by city and Washington jurisdiction, so confirm with your local building department. A licensed contractor usually pulls the permit for you.

When is the best time of year for cabinet refacing in Tacoma?

In Tacoma, the mild climate means most projects can run year-round, with only the occasional rainy stretch to plan around.

Is cabinet refacing cheaper outside Tacoma?

Sometimes. Tacoma runs about 18% above the national average. Nearby smaller towns with lower labor costs can come in cheaper, while denser urban areas often cost more. Always compare quotes from contractors who serve your specific area.

Cabinet Refacing cost in other cities

See the national Cabinet Refacing cost guide